FlexPro Forum – Discuss Your Topic!

texdata import assistant “forgets” the units in the manual setting

Home > Community > General > texdata import assistant “forgets” the units in the manual setting

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 18, 2013 at 8:24 am #8457
    Alexis LazaridisAlexis Lazaridis
    Participant

    I am trying to create a manual textdataimport-filter with the assistannt in flexPro 9.0.6. Unfortunately the units do not stay, when I set them in the corresponding dialogue.

    Is there any solution for this?

    Thanks in advance.

    January 18, 2013 at 8:24 am #12799
    Alexis LazaridisAlexis Lazaridis
    Participant

    I am trying to create a manual textdataimport-filter with the assistannt in flexPro 9.0.6. Unfortunately the units do not stay, when I set them in the corresponding dialogue.

    Is there any solution for this?

    Thanks in advance.

    January 18, 2013 at 1:40 pm #9269
    Bernhard KantzBernhard Kantz
    Participant

    There is a problem concerning the input focus. A workaround is to move the focus to the comment field (e.g. by pressing tab twice after entering the unit). This will assign the unit to the column.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.